This is a place where you can find some information about the VRBRain board.
The VRBrain autopilot features include:
- 168Mhz ARM CortexM4F microcontroller with DSP and floating-point hardware acceleration.
- 1024KiB of flash memory, 192KiB of RAM.
- MEMS accelerometer and gyro, magnetometer and barometric pressure sensor.
- 8 RC Input standard PPM , PPMSUM , SBUS
- 8 RC Output at 490 hz
- 1 integrated high speed data flash for logging data
- 1 Can bus 2 i2c Bus
- 3 Serial port available one for GPS 1 for serial option 1 for serial telemetry.
- 3 digital switch (ULN2003).
- Jtag support for onboard realtime debugger.
- 1 Buzzer output.
- 1 Input for control lipo voltage
- Include in the standard Vbrain Package there is VBrain GPS module , the module support MTEK 3329 gps , Ublox module , Fastrak IT600. On the module is available optional magnetometer. You can disconnect the board and put it far from brushless motoros to solve the problem of noise on mag signal.
- Physical Dimension 6×4 cm
- Will be available a case
