Process of hardening a USB connector for the card VR Micro Brain 5.1

In order to strengthen connector on the Micro Brain you must do the following operations:

usb1

Reinforce the side welds , through the application of new pond(do not over do it with the addition of new pond) and fuse it witha soldering medium-large iron tip.

usb2

Use the epoxy glueon the bottom side of the connector in order to stiffen the connection of the connector withthe board surface. The suggested glue is Loctite for metal with low viscosity.You mustbe very careful not to get any thing inside the connector ,this is molten tinor some small drop of glue.

 

usb3

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

News
%d bloggers like this: